To use the All-Metal filler, you must clean the surface of any wax or greasy buildup, mix filler with liquid hardener to room temperature, and stir it. Apply a thin layer to the surface with a plastic spreader and press well to glue the filler to the part you are repairing.
POWDER COAT RECOMMENDATIONS. USC all-metal can be applied to steel and painted using the powder coating process. Film thickness of the filler should remain ...
People also ask
How to mix USC all metal?
Mix filler and liquid hardener at a ratio of 1% by weight of liquid hardener to filler (or ¼ teaspoon reactor for every 2 fl. oz. of filler or 15 drops to a golf ball size amount of filler). Mix thoroughly using a plastic spreader on a non-absorbent mixing board.
How to use all metal body fillers?
1. Using a plastic spreader, apply a thin layer of filler to surface, using firm pressure for maximum adhesion. 2. Apply additional layers, if necessary, building up damaged area higher than surrounding metal surface to allow for sanding of filler.
Does body filler go on before primer?
Years ago, the accepted method was metal-filler-primer but with new technology, new products and as we learned from past mistakes we have found that the most effective and durable way to go is metal-primer-filler.
Do you put primer on before or after filler?
After thoroughly cleaning the area and removing any dirt or debris, apply a good-quality primer to help the filler stick. Once this dries, it's time to rough up the surface using coarse sandpaper. A rough surface allows the filler to grip and bond to the vehicle, which should prevent lifting later in the process.
All-Metal can be drilled or tapped and is waterproof. ... USC products are for industrial use by trained ... Refer to paint manufacturer's instructions for topcoat.
Duration: 3:35
Posted: Oct 19, 2013
Posted: Oct 19, 2013
Duration: 2:06
Posted: Feb 22, 2013
Posted: Feb 22, 2013
Missing: Directions | Show results with:Directions
$48.99 Free delivery over $99 90-day returns
Repair metal with metal—instead of lead—using USC® All-Metal. Can be drilled or tapped; Aluminum-based filler; Rustproof and waterproof; Includes hardener.
Missing: Directions | Show results with:Directions
$54.95 to $189.00 30-day returns
Premium aluminum-filled body filler ideal for metal leveling or mending. Use for rust repair, over spot welds, and as a finish coat over all types of body ...
$3.95 to $9.95 $400 5–8 day delivery Free 30-day returns
The USC All-Metal Reactor Liquid Hardener is a fine catalyst that provides rust proofing properties and gives smooth finishes. It helps to seal out moisture and ...
Missing: Directions | Show results with:Directions
MIXING. • For best results, bring putty and provided hardener to room temperature. (minimum temperature 68ºF). Knead hardener tube before use. Place a 4”.
Duration: 14:24
Posted: Jun 3, 2022
Posted: Jun 3, 2022
Missing: Directions | Show results with:Directions