Copilot
Your everyday AI companion
Bing found the following results
  1. Is an Ethernet frame/packet 1500 or 1514 bytes ? :: SG FAQ

  2. People also ask
    They are support structure for the Ethernet protocol itself. The MTU applies to the payload -- it is the largest unit of data you can cram into the packet. Thus an ethernet packet with an MTU of 1500 bytes will actually be a 1522 byte frame, and 1542 bytes on the wire (assuming there's a vLAN tag).
    According to the table here, it says that MTU = 1500 bytes and that the payload part is 1500 - 42 bytes or 1458 bytes (<- this is actually wrong!). Now on top of that you have to add IPv4 and UDP headers, which are 28 bytes (20 IP + 8 UDP). That leaves my maximum possible application message to as 1430 bytes!
    the advise is to chose from the technical requirements taking into account the specific hardware you have. So MTU=1508 is sufficent in case you have MPLS VPN and no other feature increasing the label stack. MTU=1524 allows for 6 labels, plenty from nowadays perspective.
    So MTU=1508 is sufficent in case you have MPLS VPN and no other feature increasing the label stack. MTU=1524 allows for 6 labels, plenty from nowadays perspective. However it will not allow you to use EoMPLS with full sized customer frames, which requires 1526 byte as described earlier.
  3. Solved: changing mtu-size in MPLS networks - Cisco Community

  4. Why was the MTU size for ethernet frames calculated as 1500 bytes?

  5. Configuring MTU Size - ISCW - Cisco Certified Expert

  6. cellular - MTU on mobile data networks - Server Fault

  7. Configuring MTU Size in Label Switching > Implementing Frame …

  8. MTU - Wireshark Wiki

  9. linux networking - why Ethernet MTU size is 1500? - Server Fault

  10. Jumbo frame - Wikipedia